6
©
Rear View Safety
SAFETY INFORMATION
INSTALLATION
Electric shock or product malfunction may occur if this product is
installed incorrectly.
•
Use this product within the voltage range specified. Failure to do so
can cause electronic shock or product malfunction.
•
Take special care when cleaning the monitor.
•
Make sure to firmly affix the product before use.
•
If smoke or a burning smell is detected, disconnect the system
immediately.
•
Where the power cable may touch a metal case, cover the cable
with a friction tape. A short circuit or disconnected wire may cause
a fire.
•
While installing the RVS System, be careful with the wire positioning in
order to avoid wire damage.
•
Do not watch movies or operate the monitor while driving; as it may
cause an accident.
•
Do not install the monitor where it may obstruct driver's view or
obstruct an airbag device.
•
Dropping the unit may cause possible mechanical failure.