10
©
Rear View Safety
MONITOR MOUNTING OVERHEAD IN STEP VAN
In most cases, the monitor will be mounted on the underside of overhead package
shelf of the step van.
•
Mount with machine screws/bolts, nuts and washers. Never use self taping/
drilling screws for mounting overhead.
•
Sit in driver’s seat to determine the best viewing angle.
•
Be mindful of existing equipment, such as fan.
•
Use the existing hole in the shelf if available, to route the monitor cable through.
•
If no hole exists, drill 3/4” hole. Insert a snap bushing.
Note: Some step vans, like Utilimaster vans as an example are prewired for a
backup camera.
•
Utilimaster: Look for a 15 pin plug at top left A pillar.
•
Lt/Green - Reverse
•
Pink - Ignition
•
White - Ground