20
©
Rear View Safety
COMPLETING THE INSTALLATION
Verify all cameras function properly:
•
Rear camera displays when the vehicle is put in reverse.
•
The left side camera displays with the left turn signal.
•
The right side camera displays with the right turn signal.
•
Verify that the left and right camera view works properly when the brake pedal
is pressed.
Verify that the backup sensors are located properly and function properly. (Testing
is easiest with 2 people. If a 2nd person is not available, place an object in front
of each sensor to test. A tall person may work for the upper sensors).
•
Verify that each sensor is properly positioned
•
Verify that each sensor shows it is triggering visually on the monitor.
•
Verify that you can hear that each sensor is triggering audibly.
•
Verify that the default monitor view is set to the left and right camera split
screen.
•
Verify that the rear camera is adjusted to see the edge of the bumper.
•
Verify that the rear camera sun shield is adjusted so that it shades the camera
as much as possible w/o blocking any of the view.
•
Verify that the rear camera grid lines are adjusted properly.
•
Verify that the monitor turns off when the vehicle key is in the off position.