14
©
Rear View Safety
BACKUP SENSORS OVERVIEW
This system is designed to use 6 backup sensors.
Each sensor will be labeled for the corresponding mounting location.
Upper sensors:
DU
= Driver Upper
PU
= Passenger Upper
Lower sensors:
DO
= Driver Outer
DI
= Driver Inner
PI
= Passenger Inner
PO
= Passenger Outer
•
The 2 upper sensors mount near the upper outside corners of the body.
These are sensors DU and PU.
•
The 4 lower sensors mount in the body below the door
and above the bumper or in the bumper in some cases.
These are sensors DO, DI, PI, PO.
•
Please refer to install guide for your vehicle type for ideal ECU mounting
location.
Note: Some vehicles will have existing backup up sensors –
Most will not be removed.
•
It will be best to mount the ECU first. This will allow you to:
•
Plug in the sensor cable connector and route to each sensor and determine
the length of cable needed.
•
The lower cables will route across the bottom to each sensor.
•
The upper sensor cables will route up into the cargo area to each sensor.
•
Plug in the power/monitor connector and route up into the cargo area along
with the upper sensor cables.
Senior height
to the ground
~ 16” min.
~ 32” max.
T = 1/4L
1/8L
L
L =
vehicle
width
1/8L
PI
DI
DO
PO