Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 52 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 45
coordinates.
Distance deviation angle deviation : When two positioning, such as finding the characteristics 2
might find multiple features in accordance with a feature -to-feature distance 2, and if found with multiple
features are characteristic for the origin of an arc , then at an angle to distinguish
Note : when deviation is set too small , cut leakage phenomenon occur. General distance deviation within
2mm, angle deviation of less than 5 degrees, if the piece requires more accurate , you can set smaller.
Search around
：
In the process of identification Mark point, if the recognition fails, will search near that
point. Values for specified within the scope of the search.
Stand time
：
The machine in the stable time of the stop take pictures.
8.4 Mark Point Settings
Picture2-39 Set start point
Select the first Mark point Click icon set point mark the starting point.select other Mark point
，
click settings.Also can click auto find all mark point.