Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 48 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 41
7 Camera param
Click "Camera Param" button on the control panel , you can set the following camera parameters dialog.
Picture2-33 Camera param
7.1 The adjustment of the camera on the hardware mainly by adjusting the aperture and focal length
to adjust the quality of the image but the camera is installed, can't adjust. Usually adjust the environment
light.
The camera parameters adjustment in the software are:
Contrast
：
Mainly through adjust the background color and contrast material color difference to fine
image quality.
Gain
：
is the brightness ofthe image magnification.
Exposure
：
The longer the exposure, the brightness ofthe imag higher.Click can
perform automatic expose operation
。
"contrast", "gain" are to deal with image data. So when image fainter, as far as possible to adjust the
light source (lamp on the camera )and Exposure , if still can not get the desired effect, to adjust brightness,
contrast , gain .
Speed: In the process ofcamera calibration, or when cutting cross laser moving speed.
Power: In the process ofcamera calibration processing power.
7.2 Camera Calibration
Cut Cross: click on the "cross cutting", the laser will quickly cut out a cross.