Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 40 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 33
According to the optimization conditions, the sequence of the curve elements can be controlled as your
wish. Shown in picture 2-20.
Picture 2-20 Path optimization
●
If order of layer option is selected , VisionCutwill optimize the path by layer after layer.
●
If inside to outside option is selected, you can select single inner to outer and single inner to
outer with find cut start point automatically.
●
If the block handle is selected, you should set the block height. After that, you can set the
direction of the optimization. VisionCutwill follow the rules to optimize path.
When you select the start point optimization, VisionCutwill modify the cutting start point to achieve
a good cut result. The modified start point may not be polygon point. It may be a new point on the
curve.
● When you select the auto determine cut start point and direction, the cut start point will be
modified according the shortest path rule. The modified point is one of the polygon points.
2 Sequence Manually
：
User can make the order of the curve elements manually. Shown as picture 2-21.