Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 46 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 39
1.2 Continuous moving
：
Pressing down the up. down, left, right key can move the X,Y axis. Release the button will stop the motion.
1.3 Speed
Set the Manual Speed
1.4 Dot Power
Set the Laser Power
1.5 Dot
the Laser On When Pressed
2 Automatic
：
2.1 Work control
：
Work control includes start, pause/continue, stop.
2.2 Work selected
：
When Selected,Only Work Specify Element
2.3 Shaft can move the focus, and the Z axis can be moved to a fixed
position.
2.4 U axis control, can control of feeding shaft movement, after processing
can also be automatic feed.
2.5 No camea
At this time can ignore visual, directly for cutting.
3 Valid Zone
When Selected,Only Valid Data In Green Box
4 Position
The Current Point Position Is The Starting Point.
5 Back Position
Go back the Starting Point
6 Work Param
Picture2-31 Layer Display
Double-click the layer,the layer parameter can be set.