Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 32 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 25
Picture2-11Draw tools
a) Move selected
：
Click
“ ”
and then select the curves in the display window, the curves selected can be moved when
the cursor is placed on the center of the selected curve with the left key of the mouse is being pressed
down .
b) Polygon lines
：
Click the polygon lines, Move the cursor and press down the left key of the mouse, the polygon lines will
be drew. To end the draw, press the right key of the mouse.
c) Rectangle
：
Click the rectangle, press down the left key of the mouse and move the cursor. Then release the left key of
the mouse, A rectangle is drew on the display window.
d) Ellipse
：
Click ellipse, press down the left key of the mouse and move the cursor. Then release the left key of the
mouse, A ellipse is drew on the display window.
2 Transformation
：
Picture2-12 Transformation parameters
To change the position of the curve center can change the position of the curve displayed on the window.