Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 51 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 44
Picture2-38 Model Param
8.1 Mark Point Param
Need chose mark point style to make model, VisionCut System support ” Circle Cross Diamond Ellipse
Rectangle Ring Square Triangle ” eight style,When make model please set the Corresponding
parameter.
8.2 Model Math Parameters
Smooth
：
The higher smoothing coefficient,the less scattered points of feature region be
extracted.
Similarity
：
the matching score of model and actual graphic.The higher score,the more
similar.The value ofsimilarity directly affect the matching quality.
Overlap
：
The overlap percentage of two target object envelope rectangular.This parameter
controls whether targets that has overlapping part will be matched .
Angle
：
Set the angle range of model rotation search.For example,the value set to 180.In the
matching process
，
search angle rangle is -180~180.
Match test
：
Current model match to the target image of camera field view. Test results will be
returned as results-interface. When the matching results are not satisfactory, adjust the similarity
and search-angle until the matching results are satisfactory.
8.3 Enable secondary positioning
After that find the target , not directly to the target location coordinates to find the subject , but the
change is automatically moved to the target , again taking photos, and reposition the target location