Ruida Technology RDV3040-PCI, Руководство по эксплуатации

Страница: 30 / 61

RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY 23
Picture 2-7 Array function
5 Close the lines
：
When discretization of a closed curve is executed to generate polygon lines, the start point and the end
point of the closed curve may be not coincide because of some discretization error. So you can select the
“
close the lines
”
function to made the polygon line closed. Before that, you must set the closed error.
VisionCutwill close the two points when the length of start point and the end point is less than the closed
error.
You can still select the
“
Force close
”
option. So whatever the length between the start point and the end
point is, VisionCutwill force to close the polygon lines.
Picture2-8 Close lines dialog
6 Delete overlapping lines
：
If there are two or more lines is too closed with each other, one of them is not useful. It can be deleted.
The interval length limit of two lines should be set. When VisionCutcheck that the interval length of two
lines is less that the interval length limit, VisionCutwill delete the unuseful lines. Function is shown as