Ruckus Wireless ZoneFlex 7762, Руководство по установке

Страница: 45 / 56

41
Mounting the Access Point
Step 1: Attach the Hanger Mount to the Mounting Surface
Attaching the Bracket to a Pole
The AP can be mounted vertically or horizontally on a 30mm to 60mm (1.18 in. to 2.36 in.)
pole.
To attach the mounting bracket to a pole
1. Insert the open end of one steel clamp into the upper two tabs on the hanger mount.
2. Take the other steel clamp and insert it into the lower two tabs on the hanger mount.
3. Use the clamps to attach the hanger mount to the pole.
4. Using a 10mm flathead screwdriver, tighten the clamp locks to secure the hanger mount
to the pole. Screw torque value must be 1.1-1.2 Newton meter (Nm).
5. Continue to “Step 2: Attach the Mounting Bracket to the Access Point” .
Figure 24. Attaching the mounting bracket to a vertical pole