Ruckus Wireless ZoneFlex 7762-S, Руководство по установке

Страница: 14 / 70

8
Before You Begin
Get to Know the Access Point Features
5GHz Antenna Connectors
If you want to enable the 5GHz sections of the AP (for access or meshing), you can connect
external high gain antennas (5GHz only) to the standard N-type radio frequency (RF)
antenna connectors on the top panel of the Access Point. For more information, refer to
“(Optional) Mounting and Connecting the 5GHz External Antennas” on page 56 .
Figure 6. The 5GHz antenna connectors are protected by metal caps
DC Connector In addition to PoE, you can also use direct current or DC (from a
battery, for example) to supply power to the Access Point.
NOTE: If you connect the Access Point to both PoE and DC power
sources at the same time, it will use PoE as the primary power
source and DC power as the backup power source.
Table 1. LEDs and connectors on the Access Point
Label Description
Metal caps
Before you install the AP, make a
note of the MAC address on this
label. You will need it later.