Ruckus Wireless ZoneFlex 7762-S, Руководство по установке

Страница: 39 / 70

33
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
(Optional) Set the FlexMaster Server Address
If you have a FlexMaster server installed on the network and you intend to use FlexMaster
to manage the Access Point, you can set the FlexMaster server address at this point. Before
starting this procedure, make sure you obtain the correct FlexMaster server URL.
NOTE: In addition to setting the FlexMaster server URL manually on the Access Point,
you can also use DHCP Option 43 or DNS to point the Access Point to the FlexMaster
server. For more information, refer to the
FlexMaster User Guide .
1. On the menu, click Administration > Management .
2. Scroll down the page to the TR069 / SNMP Management Choice section.
3. Verify that the Auto option is selected.
4. In FlexMaster Server URL , type the URL of the FlexMaster server on the network. You
can use either
http
or
https
to connect to the URL and include either the host name
or IP address of the FlexMaster server in the URL. The following are examples of valid
FlexMaster server URLs:
http://flexmaster/intune/server
https://flexmaster/intune/server
http://192.168.20.1/intune/server
https://192.168.20.1/intune/server
5. Click Update Settings to save your changes.
You have completed setting the FlexMaster server address on the Access Point.
Figure 27. Type the FlexMaster server URL