Ruckus Wireless ZoneFlex 7762-S, Руководство по установке

Страница: 57 / 70

51
Attaching the Mounting Brackets
Step 2: Attach the Dynamic Bracket to the Access Point
4. Using a 10mm flathead screwdriver, tighten the clamp locks to secure the bracket to
the pole. Screw torque value must be 1.1-1.2 Newton meter (Nm).
Figure 40. Tighten the clamp locks to secure the bracket
5. Continue to “Step 2: Attach the Dynamic Bracket to the Access Point” .
Step 2: Attach the Dynamic Bracket to the Access
Point
1. Place the dynamic bracket onto the flat side of the Access Point so that the four screw
holes on the bracket align with the four screw holes on the Access Point. Make sure
that the shorter end of the mounting bracket is on the same side as the antenna
connector.
2. Insert four machine screws (supplied with the Access Point) into the screw holes on the
bracket.