Ruckus Wireless ZoneFlex 7762-S Скачать руководство пользователя страница 63

Страница: 63 / 70

(Optional) Mounting and Connecting the 5GHz External Antennas

Configuring the 5GHz Antenna Gain

The 7762-S AP allows you to configure the gain of the two 5GHz external antennas (not
supplied). There are two ways you can configure the 5GHz antenna gain:

■

Configure the Antenna Gain from the AP CLI

■

Configure the Antenna Gain from the ZoneDirector Web Interface

Maximum Antenna Gain Value

The maximum value for the antenna gain that you should set depends on the type of
external antennas that you are connecting to the AP. Refer to

Table 6

for the recommended

antenna gain values that you can use for different antenna types.

Configure the Antenna Gain from the AP CLI

To configure the 5GHz antenna gain from the AP CLI

Set the 5GHz antenna gain by entering the following command:

set extantgain <wifi name> <0 - 90dBi>

Verify that the antenna gain has been configured by entering the following command:

get extantgain <wifi name>

You have completed configuring the 5GHz antenna gain from the AP CLI.

Configure the Antenna Gain from the ZoneDirector Web
Interface

To configure the 5GHz antenna gain from the ZoneDirector Web interface

Go to the

Configure

Access Points

page.

In the Access Points table, look for the 7762-S AP that you want to configure, and then
click the

Edit

link that is in the same row as the AP name.

The

Editing {MAC Address}

form appears.

Scroll down to the

Radio A/N (5.0 GHz)

section of the form.

Table 6.

Antenna gain values for different antenna types

Antenna Type

Antenna Gain Value

Omni Antenna

6dBi or lower

Patch Antenna

16dBi or lower

Point-to-Point Antenna

23dBi or lower

Содержание ZoneFlex 7762-S







































































Результаты поиска

Содержание ZoneFlex 7762-S

Отзывы:

Похожие инструкции для ZoneFlex 7762-S

Бренды по названию

Популярные бренды

Ruckus Wireless ZoneFlex 7762-S, Руководство по установке

Результаты поиска

Содержание ZoneFlex 7762-S

Отзывы:

Похожие инструкции для ZoneFlex 7762-S

Бренды по названию

Популярные бренды