Ruckus Wireless ZoneFlex 7731, Руководство по установке

Страница: 54 / 64

50
Optimizing the Distance, Orientation and Channel
Aiming
3. After one unit is at its maximum link level, adjust the second unit to increase the link
performance.
4. If the unit's elevation adjustment needs to be reversed, remove the 4 bolts mating the
two mounting bracket pieces together. Remove the 4 mounting screws attaching the
bracket to the ZoneFlex 7731 enclosure, rotate the bracket 180º and reattach the
bracket to the enclosure. Repeat steps 2 through 7. Adjust the ZoneFlex 7731 to your
desired orientation.
NOTE: The cable end of the ZoneFlex 7731 should always be pointing down.
5. Once the ZoneFlex 7731 is in the proper orientation, tighten the thumb screws flush
to the bracket.
6. Using a 10mm ratchet wrench, tighten the two hex bolts to fix the unit's orientation.
The bolt torque value must be 0.6-0.8 Newton meter (Nm).
7. Verify that the ZoneFlex 7731 link performance has not changed.
8. Press the blue Aiming button once again to stop aiming.
9. Repeat steps 1-8 for the other bridge unit.
Table 5. RSSI values of LED indicators
LED Status RSSI (<=)
LED 6
Solid 35 (Max)
Flashing 30
LED 5
Solid 28
Flashing 25
LED 4
Solid 23
Flashing 20
LED 3
Solid 18
Flashing 15
LED 2
Solid 13
Flashing 10
LED 1
Solid 8
Flashing 5 (Min)