Ruckus Wireless ZoneFlex 7731, Руководство по установке

Страница: 21 / 64

17
Preparing for Installation
Point to Point Bridge Configuration
Step 6: Change the Country Code
Change the Country Code setting to your location and reboot the bridge for updates to
take effect.
CAUTION:
If changing the Country Code after the units have been mounted, you will need
to configure the remote units first followed by the local unit, to avoid loss of connectivity.
NOTE: If you purchased the Wireless Bridge in the United States, this value is fixed to
“United States” at the factory and is not user configurable.
If you purchased the Wireless Bridge outside of the United States, verify that the value is
set to your country or region. Selecting the correct country code ensures that the Wireless
Bridge uses only the radio channels allowed in your country or region.
To set the country code to your location:
1. On the Configuration > Wireless page, select your location from the Country Code
menu.
2. The following warning message appears:
Figure 10. Country code warning message
3. Click OK to continue.
4. A reboot initiates immediately, and the Reboot in Progress screen is displayed.