Ruckus Wireless ZoneFlex 7731, Руководство по установке

Страница: 25 / 64

21
Preparing for Installation
Point to Multipoint Configuration
To manually provision a ZoneFlex 7731 as a Root or Non-Root Bridge
1. Connect the Admin computer directly to the ZoneFlex 7731 (see “Step 3: Prepare the
Administrative Computer” on page 13 ).
2. Open a Web browser (Internet Explorer) and enter the default IP address in the URL
bar (default IP:
192.168.2.1
).
3. Enter the Username and Password (default username:
super
; default password:
sp-
admin
) and click Login .
4. If the unit has not yet been provisioned (factory default state), the Manual Provisioning
Wizard launches automatically immediately after login, as shown in
Figure 15 .
Figure 15. Manual Provisioning Wizard
5. Select Root Bridge or Non-Root Bridge and click Next to continue.
6. Adjust settings on the WLAN configuration page if necessary. You may want to change
the SSID and Passphrase to something easy to remember at this point--you can change
them again after installation for increased security.
7. Set the Country Code to your location.
8. Write down the SSID, encryption settings and Passphrase, as these values will need to
be identical so that the Root and Non-Root Bridges can communicate with each other.
9. Click Next to continue. The “Your Setup” configuration summary page appears.
10. Click Reboot to confirm changes and reboot the bridge. Once the reboot is complete,
the manual provisioning is complete.