Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 419 / 430

Best Practice Checklist
Elevation of RAPs and MAPs
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
419
Best Practice Checklist
Following the mesh best practices will ensure that your mesh is well-designed, and
have the capacity and reliability required for your enterprise applications. The best
practices are summarized below as a checklist for quick review.
1 Do not mix single band with dual band APs in your mesh. They will NOT mesh.
To ensure your APs will mesh with each other, ensure they are all of the same
radio type: either all single band or all dual band APs.
2 Avoid an excessive number of hops. Ideally keep hop count to 3 or less.
3 Having more RAPs is better for performance.
4 Ensure that there are RAPs near the middle of a coverage area so as to minimize
the number of hops to reach a given MAP.
5 Where possible, ensure that the RAPs are distributed evenly throughout the
coverage area rather than clumped together.
6 Once the APs are mounted on a test-basis or permanently, use the Signal quality
measurement to ensure that the uplink signal quality from MAP to RAP is 25%
or better.
7 Ideally there should be at least one alternate uplink path for each MAP for
reliability, and the signal quality of that alternate path should also be 25% or
better.