Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 135 / 430

Controlling Network Access Permissions
Configuring Client Isolation White Lists
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
135
Figure 73. Applying a device access policy for a WLAN
Configuring Client Isolation White Lists
When Wireless Client Isolation is enabled on a WLAN, all communication between
clients and other local devices is blocked at the Access Point. To prevent clients
from communicating with other nodes, the Access Point drops all ARP packets from
stations on the WLAN where client isolation is enabled and which are destined to
IP addresses that are not part of a per-WLAN white list.
You can create exceptions to client isolation (such as allowing access to a local
printer, for example) by creating Client Isolation White Lists.
To create a Client Isolation White List:
1 Go to Configure > Access Control .
2 In the Client Isolation White List section, click Create New .
3 Enter a Name and optionally a description for the access policy.
4 In Rules , you can create multiple device-specific rules for each device to be white
listed.
• Description: Description of the device.
• MAC Address: Enter the MAC address of the device.
• IPv4 Address: Enter the IP address of the device.
5 Click
Save
to save the rule you created.