Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 363 / 430

Best Practices and Recommendations
Recovering an Isolated Mesh AP
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
363
2 Log into the AP via SSH using the same user name and password that you use
to log into the ZoneDirector web interface.
3 Enter the command
set meshcfg ssid <current_ssid>
, where
current_ssid is the SSID that the mesh network is currently using.
4 Enter the command
set meshcfg passphrase
<current_passphrase>
, where current_passphrase is the passphrase that
the mesh network is currently using.
NOTE: To paste text into PuTTY, press ctrl+v to paste, then click the right mouse
button.
5 Enter the command
set mesh auto
.
6 If there are multiple ZoneDirectors on the network, you may need to specify which
ZoneDirector the AP should connect to, using the command
set director
ip <ZoneDirector’s IP address>
.
7 If a management VLAN is used for ZoneDirector-AP management traffic, enter
the following command:
set ipaddr wan vlan <vlan ID>
.
8 Enter the command
reboot
to restart the AP with the new configuration
changes.
9 Close the SSH client.
You have completed recovering the isolated mesh AP. You should be able to manage
this AP again shortly. Please wait at least 15 minutes (to allow the mesh network to
stabilize), and then try managing this AP again via ZoneDirector.
Best Practices and Recommendations
For recommendations and best practices in planning and deploying a Ruckus
Wireless Smart Mesh network, refer to
Smart Mesh Networking Best Practices
.