Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 259 / 430

Optimizing Access Point Performance
Improving AP RF Coverage
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
259
3 When the “heat map” appears, look for the Signal (%) scale in the upper right
corner of the map.
4 Note the overall color range, especially colors that indicate low coverage.
5 Look at the floorplan and evaluate the current coverage. You can make
adjustments as detailed in the following procedure.
Improving AP RF Coverage
1 Click and drag individual AP markers to new positions on the Map View floorplan
until your RF coverage coloration is optimized. There may be a need for additional
APs to fill in large coverage gaps.
2 When your adjustments are complete, note the new locations of relocated AP
markers.
3 After physically relocating the actual APs according to the Map View placements,
reconnect the APs to a power source.
4 To refresh the ZoneDirector Map View, run a full-system RF Scan, as detailed in
Starting a Radio Frequency Scan .
5 When the RF scan is complete and ZoneDirector has recalibrated the Map View,
you can assess your changes and make further adjustments as needed.
Assessing Current Performance Using the Access Point
Table
1 Go to Monitor > Access Points .
2 When the Access Points page appears, review the Currently Managed APs for
specific AP settings, especially the Channel and Clients columns.
3 Click on the
MAC address
of any AP to view detailed information about the AP
such as associated clients, channel, signal strength, neighbor APs and warnings/
events associated with the AP.
4 If you want to make changes to individual AP settings, proceed to the next task.
Adjusting AP Settings
1 Go to
Configure
>
Access Points
.
2 Review the Access Points table and identify an AP that you want to adjust.
3 Click the
Edit
button in that AP row.
4 Review and adjust any of the following Editing (AP) options: