Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 232 / 430

Working with Access Point Groups
Modifying the System Default AP Group
232
Ruckus Wireless, Inc.
Modifying the System Default AP Group
If you want to apply global settings to all access points that are controlled by
ZoneDirector, you can modify the settings of the System Default AP group and apply
them to all ZoneDirector-controlled APs at once.
To modify the System Default Access Point group and apply global configuration
settings:
1 Go to
Configure > Access Points
.
2 In the Access Point Groups section, locate the System Default access point
group, and click the Edit button on the same line. The Editing (System Default)
form appears.
3 Modify any of the settings in Table 23 that you want to apply to the System
Default AP group, and click OK to save your changes.
Table 23. Access Point group settings
Setting Description
Name The System Default group name cannot be changed (you can
edit this field when creating/editing any other AP group).
Description The System Default description cannot be changed (you can
edit this field when creating/editing any other AP group).
Channel Range
Settings To limit the available channels for 2.4 GHz, 5 GHz Indoor and
5 GHz Outdoor channel selection, deselect any channels that
you do not want the APs to use.
Channelization Select Auto, 20MHz or 40MHz channel width for either the 2.4
GHz or 5 GHz radio.
Channel Select Auto or manually assign a channel for the 2.4 GHz or 5
GHz radio.
Tx Power Allows you to manually set the transmit power on all 2.4 GHz
or 5 GHz radios (default is Auto).
11n Only Mode Force all 802.11n APs to accept only 802.11n compliant
devices on the 2.4 GHz or 5 GHz radio. If
11n only Mode is
enabled, all older 802.11b/g devices will be denied access to
the radio.
WLAN Group Specify which WLAN group this AP group belongs to.