manualshive.com logo in svg

Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 242 / 430

Поделиться
Скачать
Ruckus Wireless ZoneDirector 3000 Скачать руководство пользователя страница 242

Working with Access Point Groups

Modifying Model Specific Controls

242

Ruckus Wireless, Inc.

VLAN, and all egress traffic is untagged. If configured as a Trunk Port, all untagged 
ingress traffic is the configured Untag VLAN (by default, 1), and all VLAN-tagged 
traffic on VLANs 1-4094 will be seen when present on the network. 

The default 

Untag VLAN

 for each port is VLAN 1. Change the Untag VLAN to:

•

Segment all ingress traffic on this Access Port to a specific VLAN.

•

Redefine the Native VLAN on this Trunk Port to match your network configura-
tion.

Trunk Ports

Trunking is a function that must be enabled on both sides of a link. If two switches 
are connected together, for example, both switch ports must be configured as trunk 
ports. 

The Trunk Port is a member of all the VLANs that exist on the AP/switch and carries 
traffic for all those VLANs between switches. 

Access Ports

All Access Ports are set to Untag VLAN 1 by default. This means that all Access 
Ports belong to the native VLAN and are all part of a single broadcast domain. To 
remove ports from the native VLAN and assign them to specific VLANs, select 
Access Port and enter any valid VLAN ID in the VLAN ID field (valid VLAN IDs are 
2-4094). 

The following table describes the behavior of incoming and outgoing traffic for 
Access Ports with VLANs configured. 

Table 24. Access Ports with VLANs configured

VLAN Settings

Incoming Traffic (from the 
client)

Outgoing Traffic (to the 
client)

Access Port, Untag 
VLAN 1

All incoming traffic is native 
VLAN (VLAN 1).

All outgoing traffic on the port 
is sent untagged. 

Access Port, Untag 
VLAN [2-4094]

All incoming traffic is sent to the 
VLANs specified. 

Only traffic belonging to the 
specified VLAN is forwarded. 
All other VLAN traffic is 
dropped. 

Содержание ZoneDirector 3000















































































































































































































































































































































































































































Отзывы:

Нет отзывов