Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 318 / 430

Creating a Guest Access Service
Configuring Guest Subnet Access
318
Ruckus Wireless, Inc.
You can create up to 22 subnet access rules, which will be enforced both on the
ZoneDirector side (for tunneled/redirect traffic) and the AP side (for local-bridging
traffic).
To create a guest access rule for a subnet:
1 Go to Configure > Guest Access .
2 Edit or create a new Guest Access Service.
3 Scroll down to the bottom and expand the Restricted Subnet Access section.
4 Click Create New to create a new subnet restriction. Text boxes appear under
the table columns in which you can enter parameters that define the access rule.
5 Under Description , type a name or description for the access rule that you are
creating.
6 Under Type , select Deny if this rule will prevent guest users from accessing
certain subnets, or select Allow if this rule will allow them access.
7 Under Destination Address , type the IP address and subnet mask (format:
A.B.C.D/M
) on which you want to allow or deny users access.
8 If you want to allow or restrict subnet access based on the application, protocol,
or destination port used, click the
Advanced Options link, and then configure
the settings.
9 Click OK to save the subnet access rule.
Repeat Steps 4 to 9 to create up to 22 subnet access rules.