manualshive.com logo in svg

Ruckus Wireless ZoneDirector 3000, Руководство пользователя, Страница: 20 / 430

Поделиться
Скачать
Ruckus Wireless ZoneDirector 3000 Скачать руководство пользователя страница 20

ZoneDirector Physical Features

ZoneDirector 1100

20

Ruckus Wireless, Inc.

Front Panel LEDs

Table 2

 describes the LEDs on the front panel of ZoneDirector 1100.

Table 2.

ZoneDirector 1100 LED descriptions

Console

DB-9 port for accessing the ZoneDirector command line 
interface

Reset

Use the Reset button to restart ZoneDirector or to reset it to 
factory default settings. 

To restart ZoneDirector, press the Reset button once for less 
than two seconds.

To reset ZoneDirector to factory default settings, press and 
hold the Reset button for at least five (5) seconds. For more 
information, refer to 

Alternate Factory Default Reset Method

.

WARNING: Resetting ZoneDirector to factory default settings 
will erase all configuration changes that you made, except for 
AP licenses and SSL certificates.

LED Label

State

Meaning

Power (embedded on 
the Power button)

Solid Green

ZoneDirector is receiving power.

Off

ZoneDirector is NOT receiving power. If 
the power cable or adapter is connected 
to a power source, verify that the power 
cable is connected properly to the 
power jack on the rear panel of 
ZoneDirector.

Status

Solid Green

Normal state.

Flashing Green

ZoneDirector has not yet been 
configured. Log into the web interface, 
and then configure ZoneDirector using 
the setup wizard.

Red

ZoneDirector has shut down (but is still 
connected to a power source).

Flashing Red

ZoneDirector is starting up or shutting 
down.

Label

Description

Содержание ZoneDirector 3000















































































































































































































































































































































































































































Отзывы:

Нет отзывов