8
SECTION 1 - INTRODUCTION
The 9000TS system is modular in design and can be used to display alarms for
immediate action and / or to record and print alarms for later analysis.
Typical systems comprise:-
Stand alone Sequential Event Recorder providing time stamping of events to a
1mS resolution.
Sequential
Event
Recorder with Combined Alarm Annunciation features and
Remote Displays
Sequential
Event
Recorder with Combined Alarm Annunciation features,
Remote Displays and Signal Duplicating Relays.
Stand alone Remote Logic Annunciator systems
Optional Alarm Management Software (AMS)
9000TS Systems are fully programmable using RTK’s windows based software utility
which is provided free of charge.
A programming port, RS232, is provided on the front of the Interface Card for
connection to a suitable PC / Laptop and no special programming language skills are
required as the user can simply enable or disable pre-defined features on a per
channel basis and the revisions can be down loaded to the system via the Interface
Card. Configuration data is stored in EEPROM on the individual cards without the
need for battery back-up.
9000TS Systems are constructed using a combination of the following key parts
MODEL NUMBER
FUNCTION
P925TS-RK
19” Rack Chassis (Base Unit)
P925TS-RK-ETN
19” Rack Chassis (Expansion Unit)
P925TS-X Interface
Card
P925TS-I
16 channel Input Cards
P925TS-O
16 channel Output Cards
P925TS-R
16 channel Repeat Relay Cards
P925TS-BL
Blanking Plates (For unused positions)
P925TS-CABLE-1 Rack
Interconnection
Ribbon Cable 1 metre length (standard)
