RSP M8307-1, Руководство по эксплуатации продукта

Страница: 7 / 60

M8307-1 version 2.4 7
1.1 Safety
1.1.1 General
The integrator installing the tool parking system must follow the safety demands stated in
standards and provisions applicable in the country where the tool parking system is installed.
The user of the Robot System Products tool parking system is responsible that law and
directives applicable in respective countries, with regards to safety, are adhered to. The user is
also responsible to guarantee that all safety devices are installed correctly.
WARNING!
Never carry out service work on a robot that has not been taken out of operation.
See safety information for the robot.
WARNING!
Only perform work on grippers or tools docked to the tool parking system if the air
pressure is safely switched off.
WARNING!
Be aware that tool hangers, tool plates and tool stands are heavy and may cause
personal injury and equipment damage if dropped.
WARNING! The electrical control of the moveable dust cover must be interlocked
by the normal safety system of the robot cell,
NOTE!
The tool changer shall always be in locked position, also when empty, to avoid
unexpected locking if air pressure is lost.
1.1.2 Explanation of warnings
The warnings in this document are specific to the products in this manual. It is expected that the
user also pay attention to certain notifications from the robot manufacturer and/or the
manufacturers of other components used in the installation.
WARNING!
The warning sign will make you aware that a situation could result in potential
serious injury or damage to equipment.
NOTE!
The note sign will alert you about something important to consider.