RSP M8307-1, Руководство по эксплуатации продукта

Страница: 46 / 60

46 M8307-1 version 2.4
6.2 Wear parts
Wear parts should be replaced before considerable damage occurs. The interval depends on the
number of tool changes and its working environment. Generally, the more contaminated
environment, the closer maintenance intervals.
The following parts are considered as wear parts:
o
Tool hanger and tool plate guide pins
o
Guide block
o
Tool plate bushings
6.3 Inspection and cleaning
6.3.1 Visual inspection (monthly)
Visually check the following
Equipment Description Action
Guide pins on tool hanger
and tool plate Not worn, damaged or dirty. Replace if worn or damaged. Clean
when dirty.
Bushings on tool plate Not worn, damaged or dirty. Replace if worn or damaged. Clean
when dirty.
Cables and connector Not worn, damaged. Replace if worn or damaged.
Tool stand column Not damaged or dirty Replace if damaged. Clean when dirty.
Tool hanger in general Not damaged or dirty. Replace if damaged, Clean when dirty.
6.3.2 Cleaning (every third month)
Clean the following
Equipment Action
Guide pins on tool hanger and tool
plate Wipe clean with lint free cloth. Apply a small amount of grease
(Molykote BR2Plus).
Bushings on tool plate Wipe clean with lint free cloth. Apply a small amount of grease
(Molykote BR2Plus).
Tool stand column Wipe clean with lint free cloth.
Tool hanger in general Wipe clean with lint free cloth.