RSP M8307-1, Руководство по эксплуатации продукта

Страница: 39 / 60

M8307-1 version 2.4 39
5.7 Mounting of tool hanger extension
Action Note
1 Safety Read the safety section (1.1).
2 Mount extension Mount the tool hanger
extension (P8371) with the
enclosed four M12x40
screws and corresponding
washers on the tool stand
column. See tightening
torques above.
WARNING! The tool hanger
extension is heavy and might
cause personal injury and
equipment damage if
dropped.
3 Fit tool hanger Lift and fit the tool hanger to
the tool hanger extension.
WARNING! The tool hanger
is heavy and might cause
personal injury and
equipment damage if
dropped.
4 Mount tool hanger Mount the tool hanger on the
tool hanger extension with
the enclosed two M12x50
and two M12x20 screws
using a torque wrench. See
tightening torques above.
NOTE! When tool hanger
extensions P8371-13 and
P8371-18 are used the
aluminum profile P8313-05
should be exchanged for
P8313-06.