RSP M8307-1, Руководство по эксплуатации продукта

Страница: 41 / 60

M8307-1 version 2.4 41
4 Mount profile Mount the four M4 screws, the
dust cover, the two supports,
the eight spacers and the four
T-nuts. Remove the caps from
the profile and enter the four T-
nuts in respective grooves.
Tighten with a torque wrench.
Apply a small amount of
threadlocker (Loctite 2400) in
the screw holes before
mounting.
See tightening torques above.
NOTE! The four T-nuts (M4)
must be entered into the
aluminum profile before
fastening the screws.
5 Mount profile Fasten the dust cover supports
with the dust cover using two
M4 screws and the
corresponding locking screws
with a torque wrench.
See tightening torques above.
6 Mount dust cover bracket Place the dust cover bracket in
position and mount it to the
aluminium profile using four
M5-screws and the
corresponding spacers and T-
nuts with a torque wrench.
Apply a small amount of
threadlocker (Loctite 2400) in
the screw holes before
mounting.
See tightening torques above.