RS SAILING RS Quest, Руководство по монтажу

Страница: 38 / 86

36
BEFORE PICKING UP THE MAST, CHECK THAT YOU ARE NOT IN
THE VICINITY OF OVERHEAD POWER CABLES
Attach the shroud to the middle of the
shroud adjustor plate with the clevis pin
and split ring provided.
In light winds use hole 2 or 3.
In strong winds use hole 4, 5 or 6.
Push the pin in from outboard towards
the centreline of the boat.
6.11 - Shrouds
Locate the mast foot in the mast step and lay the mast in the boat.
Before stepping the mast, familiarise yourself with how the “foot” (bottom end) of
the mast will fit into the “step” (fitted to the boat).
a)
b)
c)
d)
Slip the neoprene boot
up the shroud, pointed
end to the top.
Note: On boats built from April 2017
onwards, neoprene vernier covers and
5mm bolts will be provided as standard.
For older boats, the Quest Upgrade Pack
provides everything you jneed to bring
your boat up to the newest spec.
If not already fitted, slide the adjuster
plate onto the shroud eye bolt.
Wrap PVC electrician’s tape around
the split rings for security, and to
avoid snagging. This is particularly
important if you don’t have the
neoprene vernier covers.