Royal Enfield CONTINENTAL GT 650 TWIN 2018, Руководство по обучению обслуживанию

Страница: 99 / 198

ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
98
Fastener, Size, Tool Usage, Precautions, Photos Aggregate to Assemble Instructions

Use angle torque wrench (a) to tighten at
specified angle value.
12 mm Socket
with Angle
wrench
1st Torque 15 Nm/1.5 kgf-m
2nd Torque 35 Nm/3.5 kgf-m
Angular Torque 270° (deg)
CAUTION
Torque and
angle should be
as specified. Do
not provide
over - torque as
it will damage
the bolts.
11. FD Sprocket

Assemble rubber seal on Drive shaft and
ensure it is seated properly on plain bush.

Assemble plain bush (a) on Drive shaft (b)
from smaller end.

Assemble FD sprocket (a) on Drive shaft
(b) .
Angular torque
wrench
Torque Wrench

Install splined washer into driveshaft.

Assemble FD Sprocket nut (M20) (a) on
Drive shaft.
NOTE
Champered teeth of sprocket facing
outwards.