Royal Enfield CONTINENTAL GT 650 TWIN 2018, Руководство по обучению обслуживанию

Страница: 133 / 198

ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
132
Sl.
No. Power train Component
Item
P Code
Class
Blink
code
Healing
After
33 O2 sensor heater 2 Mag Side HO2S Heater Control Circuit Open P0050 3 DC 46
34 O2 sensor heater 2 Mag Side HO2S Heater Control Circuit Low P0051 3 DC 46
35 O2 sensor heater 2 Mag Side HO2S Heater Control Circuit High P0052 3 DC 46
36 Secondary air injection system Secondary Air Injection System Switching Valve Circuit Open P0413 3 DC 54
37 Secondary air injection system Secondary Air Injection System Switching Valve Circuit High P0412 3 DC 54
38 Secondary air injection system Secondary Air Injection System Switching Valve Circuit Low P0410 3 DC 54
39 Fuel Injector 1 Cl Side Injector Circuit Open P0201 3 DC 33
40 Fuel Injector 1 Cl Side Injector Circuit High P0262 3 DC 33
41 Fuel Injector 1 Cl Side Injector Circuit Low P0261 3 DC 33
42 Fuel Injector 2 Mag Side Injector Circuit Open P0202 3 DC 34
43 Fuel Injector 2 Mag Side Injector Circuit High P0265 3 DC 34
44 Fuel Injector 2 Mag Side Injector Circuit Low P0264 3 DC 34
45 Roll Over Sensor Roll Over Sensor Circuit High/ Open P1630 3 DC 15
46 Roll Over Sensor Roll Over Sensor Circuit Low P1631 3 DC 15
47 Roll Over Sensor Roll Over Sensor Circuit Non Plausible P1632 3 DC 15
48 Side Stand Switch Side Stand Switch Circuit High/ Open P1633 3 DC 25
49 Side Stand Switch Side Stand Switch Circuit Low P1634 3 DC 25
50 Side Stand Switch Side Stand Switch Circuit Non Plausible P1635 3 DC 25
51 Fuel Pump Fuel Pump Control Circuit Open P0627 3 DC 41
52 Fuel Pump Fuel Pump Control Circuit Low P0628 3 DC 41
53 Fuel Pump Fuel Pump Control Circuit High P0629 3 DC 41
54 Starter relay Starter Relay Circuit High P0617 3 DC 26
55 Starter relay Starter Relay Circuit Low P0616 3 DC 26
56 Battery - ADC System Voltage Low P0562 3 DC 31
57 Battery - ADC System Voltage High P0563 3 DC 31
58 Battery - ADC System Voltage Non Plausible P0560 3 DC 31
59 Sensor Supply 1 Sensor Reference Voltage “A” Circuit P0641 3 DC 32
60 Sensor Supply 2 Sensor Reference Voltage “B” Circuit P0651 3 DC 32
61 Accessory Relay Accessory Relay Circuit Open P1638 3 DC 48
62 Accessory Relay Accessory Relay Circuit High P1639 3 DC 48
63 Accessory Relay Accessory Relay Circuit Low P1640 3 DC 48
64 Neutral LED Neutral LED Circuit High P1636 3 DC 47
65 Neutral LED Neutral LED Circuit Low P1637 3 DC 47
66 CAN CAN Line Short to Battery or Ground U0009 3 DC 55
67 CAN Lost Communication With Anti-Lock Brake System (ABS) U0121 3 DC 56
68 CAN Invalid Data Received From Anti-Lock Brake System (ABS) U0415 3 DC 57
Driving Cycle – (DC)
1 DC = Key On, Kill Switch On, Engine Start,
Kill Switch Off & Key Off
Blink Pattern Definition
Error Blink Code
Engine Oil Temperature
Sensor Circuit Low
12
12 = 1- Long, 2 - Short
Manual Method for Error (DTC) Check
Ignition Key off – Kill Switch off
Throttle Wide Open
Ignition key ON
Kill switch On
Wait for 3 seconds (minimum)
Clutch Pull In
Clutch Release
Blink entry mode activated, throttle can be released
Note : If the entry conditions are not met within 8 seconds, MIL
will not blink and the process has to repeated.







