Royal Enfield CONTINENTAL GT 650 TWIN 2018, Руководство по обучению обслуживанию

Страница: 139 / 198

ROYAL ENFIELD 650 TWIN SERVICE TRAINING MANUAL
138
Block Ports
Pressurise
Vehicle Pressure test
schematic Diagram
(Figure 3)

Connect another hose to the RH side throttle body
Hose, Purge (item 9).

Pressurise the system through both the Evap
Canister atmosphere breather and the RH side
throttle body Hose, Purge at the same time as
below:
1. Fill at 20kPa for 20 seconds.
2. Stabilize, 50s.
3. Drop less than 300 Pa over 5 minutes.
Standard Torques
Bolt Size Metal Plastic
Interface (Nm) Interface (Nm)
T20 Self Tapper N/A 1.5
M5 5 3
M6 10 3
M8 25 N/A
M10 45 N/A
M12 70 N/A
TORQUE VALUE
Sl. Fixing Location Thread Torque
No.
1 Side stand switch M6 5 Nm
2 Top yoke & handlebar M8 20 Nm
riser pinch bolts
3 Stem special nut N/A 8 Nm
4 Rear Shock absorber
Unit Top mounts M8 18 Nm
5 Rear spindle nut M16 70 Nm
6 Swingarm Spindle M16 100 Nm
7 Front spindle nut M16 70 Nm
8 SAI solenoid mounting M5 2 Nm
9 Temperature sensor M5 2 Nm
10 Upper Frame Adjuster M18 3 Nm
11 Swingarm Adjuster M22 3 Nm
12 Lower Frame Adjuster M16 3 Nm
The fastioners torque and tightening requirements
are given below.