Rowe 7770, Руководство по обслуживанию на поле и каталог запасных частей

Страница: 15 / 110

1 - 2
Part No. 900-68702
7800 Deluxe Snack / Candy Vendors Field Service Manaul & Parts Catalog
Figure 1-1
Adjustable Wall (5-Selection Shelf)
Figure 1-2
Adjustable Wall (10-Selection Shelf)
Initial Set-up Procedure
Set up the vendor as follows:
1. Open the main door all the way.
2. Set the main switch to OFF.
3. Level the cabinet front to rear and
side to side. All four cabinet legs
are adjustable.
4. Ensure that the fluorescent lamp is
secure in its socket and that all
electrical plugs are firmly seated in
their sockets.
5. Plug the line cord into an appropri-
ate receptacle. Ensure good ground.
6. Install a recommended coin mech,
if applicable. See Specification
sheet on page vi.
a) Check coin chute alignment.
b) Check return lever operation.
c) Adjust if necessary.
7. Set the main switch to ON.
8. Set pricing. ( See Program Operation,
Section 3. )
9. Pull the top product shelf out and
lower it to the loading position.
Load product in accordance with
the specifications listed at the
beginning of this manual.
10. Three (782), four (788) and five
(787) selection shelves feature an
adjustable wall to the left of the far
right spiral. The wall can be installed in
any one of the four positions in the
bottom of the tray. After adjusting the
wall for the desired width, check to
be certain that the product moves
freely when the selection on each side
of the adjustable wall is vended (
See
Figure 1-1 and Page 6-22). Addi-
tional tray walls are shipped with each
machine and can be installed in the
pastry tray slots to accommodate the
narrower items. On 6, 8 or 10 selection
trays, the adjustable wall swings out
from the right side of the shelf wall
(
See Figure 1-2 ).
11. Install product pushers where required.
The plastic product pushers are
snapped onto the helix in the desired
position to assure product delivery
(
See Page 2-2, Figure 2-1 ).
12. Place selection identification labels on
selections according to pages xiii & xiv.
13. Place price labels on selections.
14. Gum and Mint Assembly: Unclip price
cover bezel and install selection number
and price label.
15. Gum and Mint Assembly: Reinstall the
price cover bezel by snapping it into
place.
16. Gum and Mint Assembly: Load the
horizontal Gum and Mint Unit by
grasping the pair of handles located on
the front of the machine and pulling
forward. Slide the cover to the rear of
machine.
Adjustable
Wall