Rowe 7770, Руководство по обслуживанию на поле и каталог запасных частей

Страница: 37 / 110

3 - 10
Part No. 900-68702
7800 Deluxe Snack / Candy Vendors Field Service Manaul & Parts Catalog
a. Press <9>
b. Press <0>
3. Press <7> to return to the POS menu.
4. Press <1> to begin programming
message.
5. Use the following keys to program the
POS message:
<1> Move cursor position to the right.
<2> Move cursor position to the left.
<3> Increment character.
<4> Decrement character.
<5> Place character in message.
<6> Insert character in message.
<7> Delete character.
<9> First of two keystrokes required
to delete to the end of the message.
The <0> must be pressed to complete
this function.
<0> Save message and exit to root
menu.
<RESET> Exit to the root menu
with no changes saved.
6. Press <3> until the column on the right
scrolls to the desired letter. Hold the
key down to scroll more quickly.
7. Press <5> to enter the letter.
8. Repeat step 6 until the message is
complete. Use the other control keys
as needed.
9. Press <0> to save the message and
return to the root menu.
B. Programming the Serial Number
1. Press <7> on the keypad.
2. Press <2> to get to the serial number
programming mode.
3. Use the same control keys used to
program the POS message.
4. Program the number.
5. Press <0> to save the message and
return to the root menu.
C. Programming the ID Number
1. Press <7> on the keypad.
2. Press <3> to get to the ID program-
ming mode.
3. Use the same control keys used to
program the POS message and the
serial number to program the ID
number.
4. Program the ID number.
5. Press <0> to save the message and
return to the root menu.
D. Programming the Date
1. Press <7> on the keypad.
2. Press <4> to get to the date program-
ming mode. The date format will be
shown before the date is displayed.
3. Press <1> to increase the MM field.
Press <2> to decrease the MM field.
4. Press <3> to increase the DD field.
Press <4> to decrease the DD field.
5. Press <7> to increase the YY field.
Press <8> to decrease the YY field.
6. When the correct date is showing in
the display, press <0> to save and
exit the date programming mode.
7. Press <RESET> to exit without
saving the new date.
E. Programming the Time and Day
1. Press <7> on the keypad.
2. Press <5> to get to the time and day
programming mode. The time and
day will be displayed as “HH.MM
DAY”.
3. Press <1> to increase the HH field.
Press <2> to decrease the HH field.
4. Press <3> to increase the MM field.
Press <4> to decrease the MM field.
5. Press <7> to increase the DAY field.
Press <8> to decrease the DAY field.
6. When the correct time and day is
showing in the display, press <0>
to save and exit the time and day
programming mode.
7. Press <RESET> to exit without saving
the new date.