Rowe 7770 Скачать руководство пользователя

Страница: 34 / 110

Part No. 900-68702

3 - 7

Section 3: Program Operation

Denominations Accepted (ACPT
$xx Y/N)

This option will allow unconditional rejec-
tion of specific denominations. This feature
has no effect when using a pulse bill
validator without escrow capability. In
those cases, refer to the bill validator
manufacturer for instructions for rejecting
specific notes.

Dumb Credit System Programming
Instructions:

Display responds with “COIN MEC
Y” or “COIN MEC N”.

Press <1> to toggle Y/N.

Press <5> to save the setting and
proceed to the next menu option.

Display responds with “COIN
COUNT” or COIN LEVEL”.

Press <1> to toggle COUNT/
LEVEL.

Press <5> to save the setting and
proceed to the next menu option.

Display responds “SCALE 5”.

Press <1> to change the scale, 1, 5,
10, 20, 50, 100.

Press <5> to save the setting dis-
played and proceed to the next menu
option.

10. Display responds “DP POS 0.00”.
11. Press <1> to change the decimal

position to .000, 000, 00.0, 0.00.

12. Press <5> to save and proceed to the

next menu option.

13. Display responds “BILL VAL Y” or

“BILL VAL N”.

14. Press <1> to toggle Y/N.

15. Press <5> to save and proceed to the

next menu option.

16. Display responds “BV TYPE S” or

“BV TYPE P”. S for serial, P for
pulse.

17. Press <1> to toggle S/P.
18. Press <5> to save and proceed to the

next menu option.

19. Display responds “BV ESCROW Y”

or “BV ESCROW N”.

20. Press <1> to toggle Y/N.
21. Press <5> to save and proceed to the

next menu option.

22. Display responds “ESCROW ON” or

“ESCROW OFF”.

23. Press <1> to toggle ON/OFF.
24. Press <5> to save and proceed to

the next menu option.

25. Display responds “ACPT $ 1 Y” or

“ACPT $ 1 N”.

26. Press <1> to toggle Y/N.
27. Press <5> to save and proceed to the

next menu option.

28. Display responds “ACPT $ 2 Y” or

“ACPT $ 2 N”.

29. Press <1> to toggle Y/N.

30. Press <5> to save and proceed to the

next menu option.

31. Display responds “ACPT $ 5 Y” or

“ACPT $ 5 N”.

32. Press <1> to toggle Y/N.

33. Press <5> to save and proceed to the

next menu option.

34. Display responds “ACPT $10 Y” or

“ACPT $10 N”.

35. Press <1> to toggle Y/N.
36. Press <5> to save and proceed to the

next menu option.

37. Display responds “ACPT $20 Y” or

“ACPT $20 N”.

38. Press <1> to toggle Y/N.
39. Press <5> to save and go back to

step 1 above or press <0> to save
and return to the ‘-’ prompt.

MDB Cash System (CTYPE MDB)

This cash system option supports a stan-
dard MDB coin changer and bill validator.

Coin Changer (COIN MEC Y/N)

Set this option to ‘Y’ if a coin changer is
installed otherwise set this option to ‘N’.

Содержание 7770















































































































Результаты поиска

Содержание 7770

Отзывы:

Похожие инструкции для 7770

Бренды по названию

Популярные бренды

Rowe 7770, Руководство по обслуживанию на поле и каталог запасных частей

Результаты поиска

Содержание 7770

Отзывы:

Похожие инструкции для 7770

Бренды по названию

Популярные бренды