Rowe 7770, Руководство по обслуживанию на поле и каталог запасных частей

Страница: 39 / 110

3 - 12
Part No. 900-68701
7
800 Deluxe Snack / Candy Vendors Field Service Manaul & Parts Catalog
triever. The report may be printed, dis-
played or sent to DEX/UCS collection
device.
Programming Instructions:
1. Press <8> on the keypad. The display
will show "DISPLAY MIS. Push <1>
again to display "PRINT MIS". Push
<1> again to display "DEX MIS".
Push <1> again to re-display "DIS-
PLAY MIS".
2. With the desired function displayed,
push <0> to start the report. If the
report is displayed, follow the steps
below.
3. Response will be “SERIAL NUMBER”
(the first line of MIS data).
4. Press <0> to proceed to the next line
of MIS data.
5. Repeat step three until you reach the
end of the MIS data. The last line will
prompt the operator, “CLR MIS N”.
6. Press <1> to toggle Y/N.
7. Press <RESET> at any time to return
to the root menu.
KEY 9
X. Key 9 - Security Code
Programming
Purpose:
To protect specific menus from unautho-
rized access. If the security feature is
enabled, the operator must select which
menus are protected by the security
feature. Menus that are protected by the
security feature will only be available if the
Service Mode is accessed by entering the
security code on the keypad. Menus that
are not protected by the security feature
will be accessible when the service mode is
accessed by pressing the “MODE” button
on the controller.
Programming Instructions:
1. Press <9> on the keypad.
2. Response will be “ENTER CODE”.
3. Enter a four digit security code.
4. The code number will flash four times.
5. The display will read “SECURE OFF/
ON”.
6. Press <1> to toggle Off/On.
7. Press <5> to step through each menu.
8. Press <1> to toggle Off/On.
This feature must be set to ON to
prevent unauthorized access or code
changes. Menu 9 must also be set to
ON.
9. Press <0> to save the new security
status and return to the root menu.
10. Press <RESET> to exit this function
without saving.
XI. KEY 0 - Motor Count
Test Vend, and Hopper Setup
Purpose:
To test all of the motors in the machine to
make sure they are working and to setup
the optional bulk coin dispenser. There are
seven options available in this menu.
Key 1 is the motor count.
Key 2 allows test vending individual
motors one at a time.
Key 3 allows test vending all motors
in the machine.
Key 4 displays motor status informa-
tion.
Key 5 will display the maximum price
set in the machine.
Key 6 will run the automatic motor
detection function.
Key 7 accesses the bulk coin dis-
penser setup features.
Programming Instructions:
A. Motor Count
1. Press <0> to get to the motor function
menu.
2. The display will read “MTR
FUNCT?”.
3. Press <1> to display the motor count.