Rover S2 SCOUT, Руководство пользователя

Страница: 22 / 44

S2
USER MANUAL
22
10 PERFORMING MEASURES: MEAS
Press the MEAS [G] key to tune the required transponder (please refer to
chapter 9 SIGNAL TUNING: PLAN at page 17).
10.1 ANALOGUE TRANSPONDER
On the display second row SAT ANALOG will appear.
On the subsequent rows, the following informations will appear:
•
High/low band and polarization (third row, on the left)
•
DiSEqC status (third row on the right)
•
Local oscillator frequency (fourth row on the left)
On the right bottom angle, the letter “S” will appear, matching the “SAT” label on the
meter; also, a black square will appear, matching the “AN” label on the meter.
~
LEVEL MEASUREMENT
In the lowest part of the display the level of the received signal, and the
correspondant measurement unit, are shown. The level is shown also on a level
bar. On this bar, the peak value reached during the measurement operation will be
shown.
~
SPECTRUM ANALYSIS
Check chapter 11 SPECTRUM ANALYZER MODE at page 27.