Rover S2 SCOUT, Руководство пользователя

Страница: 9 / 44

S2
USER MANUAL
9
~
LANGUAGE
Press repeatedly the SELECT [M] key to highlight the label LANGUAGE
Press repeatedly the UP [H] or DOWN [L] keys to set the desired langauge. In
some release only the english language is available.
~
KEYS BEEP
Press repeatedly the SELECT [M] key to highlight the label KEYS BEEP
Press repeatedly the UP [H] o DOWN [L] key to set the desired volume: OFF ,
LOW, MEDIUM or HIGH.
~
DISPLAY BACKLIGHT (DISP.LIGHT)
When no key is pressed, the display backlight will turn off after a certain time-
delay. To set the proper time:
Press repeatedly the SELECT [M] key to highlight the label DISP.LIGHT
Press repeatedly either the UP [H] or the DOWN [L] key to select FullON (light
always on) or 30 sec (light off after 30 sec)
6.2 METER SETUP
Press repeatedly the SELECT [M] key to highlight the label SAT CONFIG.&SCR
Press the UP [H] key to access the configuration menu.
~
SET THE LOCAL OSCILLATOR FRQUENCY
Press repeatedly the SELECT [M] key to highlight the label LOC.OSC.
Press repeatedly either the UP [H] or the DOWN [L] key to set STANDARD (signal
direct from the antenna, requiring down-conversion) or 0MHz(IF) (signal with
intermediate frequency, e.g. coming from a LNB)
~
SET THE AVAILABLE NUMBER OF POLARIZATIONS FOR THE LNB 1
Press repeatedly the SELECT [M] key to highlight the label LNB1 DiSEqC.
Press repeadetly the UP [H] or DOWN [L] key to set the required number of
polarizations for LNB1 (A = 4 polarizations, B = 8 polarizations, C = 12
polarizations, D = 16 polarizations).