S2
USER MANUAL
40
MANTAINING THE METER
CLEANING THE METER
Cleaning the meter from dust and dirt is easy and helps mantaining it in optimal work
conditions through the years. The cleaning procedure is simple and quick and requires
only minor attention.
Never use chemical aggressive products (diluent) and/or abrasive or rough clothes
which may damage plastics and displays.
Always use a soft cloth, damped with a simple water and alcohol solution or a de-
greasing not abrasive liquid soap.
Keyboard and display should be gently cleaned. Rubbing the keyboard and/or the
display(s) may seriously damage their functions.
MANTEINANCE AND CARE OF THE METER
This meter has been designed to withstand severe conditions of use. Even so, its life
may be prolonged by respecting some simple and effective rules:
•
The meter has not been designed to withstand high temperatures (over 60°C or
140° F). Those temperatures can be easily reached when the meter is left in a
car, especially behind the windshield, or in the trunk. The LCD display and/or
other details may easily be damaged by the extreme temperature.
•
The internal battery may rapidly loose its efficiency if exposed to high or low
temperatures. This will result in reduced autonomy of the meter when powered
by internal battery.
•
When recharging the internal battery, do allow a good air circulation around the
meter and the adapter: do not cover it with clothes and do not recharge the
battery when the meter is contained in its transport case
•
The meter is not waterproof, even if it is protected against incidental water
drops. In case of contact with water, when electronic circuits may be damaged,
allow the meter to dry thoroughly before trying to turn it on. Do not use hairdryer
or other strong heating sources, but just leave the meter in quiet air. Contact as
soon as possible Rover Laboratories S.p.A. Technical Assistance.
•
The graphic display is protected by a special glass screen. If hit, this protective
screen may adhere to the actual display, causing a “stain” effect. The result will
be a reduced visibility and blind spots on the screen. It is possible to solve this
inconvenient by applying a strip of mild paper-masking tape to the display and
gently pulling it out. Do not use any kind of strong adhesive tape (electrical
tape, duct tape or even scotch tape) which may leave glue stains on the
display. In case of doubt, please contact Rover Laboratories S.p.A. Technical
Assistance.
Содержание S2 SCOUT
Страница 42: ...S2 USER MANUAL 42 NOTE...
Страница 43: ...S2 USER MANUAL 43 NOTE...