S2
USER MANUAL
25
The Noise Margin and MER measurements will be shown also on a level bar,
with peak value memory.
Also, in the bottom row, the relevant network information will be presented:
•
bouquet name: will appear after a few seconds and only if the quality of
the signal is sufficient;
•
orbital position of the received satellite;
•
encrypt used by the network, if at least one program of the network is
encrypted: will appear after a few seconds and only if the quality of the
signal is sufficient;
•
“S”, matching the “SAT” label on the meter;
•
a lock, matching the “DIG” label on the meter: it will appear closed if the
signal has been correctly locked; if not, it will appear open.
{
BER MEASUREMENTS BEFORE AND AFTER VITERBI
CORRECTION
Press once the MEAS [G] key, to switch from the previous screen to the BER
measurement screen. The BER measurement before (bBER and PreBER) and
after (aBER and PosBER) Viterbi correction will appear.
Measurements will appear also on level bars, with peak value memory.
{
FEC AND BOUQUET MAIN DATA
Press once the MEAS [G] key, to switch from the previous screen to the FEC
screen. The FEC vaule will be displayed.
Only if there are the corresponding values in the bouquet, the following
informations will be displayed:
Содержание S2 SCOUT
Страница 42: ...S2 USER MANUAL 42 NOTE...
Страница 43: ...S2 USER MANUAL 43 NOTE...
