Rover S2 SCOUT, Руководство пользователя

Страница: 18 / 44

S2
USER MANUAL
18
~
CHANGE THE TRANSPONDER
Press repeatedly the SELECT [M] key to highlight the transponder number. To select
the required transponder, press repeatedly either the UP [H] or the DOWN [L] key to
navigate to the next or previous transponder. To quickly shift transponder, just keep
pressed either the UP[H] or DOWN [L] key up to reach the desired transponder.
~
MANUALLY CHANGE THE FREQUENCY
In need of manually change the frequency, press repeatedly the SELECT [M] key to
highlight the area of the actual frequency, then press repeatedly either the UP [H] or
the DOWN [L] key to modifiy the frequency in 0,1 MHz step. To quickly change the
frequency, just keep pressed either the UP[H] or DOWN [L] key up to reach the
desired frequency.
9.2 MANUALLY TUNING THE TRANSPONDER (BY KNOWING ALL
THE DISTINCTIVE PARAMETERS)
IT IS MANDATORY TO KNOW ALL THE DISTINCTIVE PARAMETERS.
Select a customized Transponder Memory Plan (please refer to chapter 13
CREATING A USER DEFINED TRANSPONDER MEMORY PLAN at page 31).
From any screen, press repeatedly the MEAS [G] key up to show either the
level measurement screen (in case of tuning an analogue signal) or the channel
power measurement screen (in case of tuning a digital signal).
Press repeatedly the SELECT [M] key to highlight the kind of signal to be tuned in the
second row of the screen.
WARNING: THE FREQUENCY MUST BE MODIFIED AT LAST!
Press repeatedly the UP [H] and DOWN [L] keys to show the kind of signal to be
tuned (SAT ANALOG, SAT QPSK DVB-S, SAT QPSK DSS).