Rover S2 SCOUT, Руководство пользователя

Страница: 10 / 44

S2
USER MANUAL
10
~
SET THE AVAILABLE NUMBER OF POLARIZATIONS FOR THE LNB 2
Press repeatedly the SELECT [M] key to highlight the label LNB2 DiSEqC.
Press repeadetly the UP [H] or DOWN [L] key to set the required number of
polarizations for LNB1 (A = 4 polarizations, B = 8 polarizations, C = 12
polarizations, D = 16 polarizations).
~
MANAGING LNB OR MULTISWITCH SUPPORTING THE SCR
COMMUNICATION PROTOCOL: SAT SCR MENU
This function is used when controlling or checking single cable satellite
installations.
Press repeatedly the SELECT [M] key to highlight the label SatSCR Setup?. Press
the UP [H] key to access this function.
{
SatSCR USER:
Press the SELECT [M] key to highlight the label SatSCR USER. Press
repeatedly the UP [H] o DOWN [L] to set the user identification number. The
measurement in progress will be referred to this user.
It is possible to identify up to 8 different user, each with a particular SCR
frequency.
To manually set each user frequency, please refer to next item SatSCR FREQ:
at page 10. If the label NONE appears in the field of the selected user, it is not
possible to manually set any frequency.
{
SatSCR FREQ:
To manually set the SCR frequency for a given user, select the desired user
identification number and then press the SELECT [M] key to highlight the label
SatSCR FREQ:. Press repeatedly either the UP [H] or the DOWN [L] key to set
the desired frequency in 1 MHz step. If the label NONE appears in the field of
the selected user, it is not possible to manually set any frequency.