Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 50 / 80

5–10 • DashBoard Menus HDC-8223A(-S) User Manual (Iss. 03)
Output Video Tab
This section outlines the sub-tabs available in the Output Video tab.
Output Routing Tab
The Output Routing tab allows selection of each of the four video output coaxial connectors as
SD-SDI or CVBS output mode. Table 5.7 summarizes the options available in the Output
Routing tab.
Analog Video Tab
The Analog Video tab provides CVBS parameter controls and test pattern output controls. Table
5.8 summarizes the options available in the Analog Video tab.
Table 5.7 Output Routing Tab Items
Tab Title Item Parameters Description
Output
Routing
Output #
CVBS For each of the four coaxial video output
connections, provides independent
selection of setting the port as an SD-SDI
video output or CVBS analog SD output.
The output numbers correlate to the output
port numbers as labeled on the rear
module being used.
SD-SDI
Table 5.8 Analog Video Tab Items
Tab Title Item Parameters Description
Analog Video
Oversampling
Enable
Enables video DAC oversampling.
Oversampling can improve rendering of
motion for down-conversions to the
CVBS SD analog output.
Disable Disables this feature
Color
Enable
Enables chroma content in the CVBS
output
Disable Disables this feature
Test Pattern
Enable
Enables manual insertion (replacement) of
CVBS output video to instead output 75%
color bars
Disable Disables this feature
DAC Gain
Calibration
-7.500 to 7.500
Cb Calibration -6.00 to 6.00
Calibration to
EEPROM
Save