Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 16 / 80

1–8 • Introduction HDC-8223A(-S) User Manual (Iss. 03)
Documentation Terms and Conventions
The following terms and conventions are used throughout this manual.
Terms
The following terms are used:
• “ Board ”, and “ Card ” refer to openGear terminal devices within openGear frames,
including all components and switches.
• “ DashBoard ” refers to the DashBoard Control System.
• “ DFR-8321 series frame ” refers to all versions of the DFR-8321 series frames and any
available options unless otherwise noted.
• “ HDC-8223A ” refers only to the HDC-8223A without the Frame Sync option enabled.
• “ HDC-8223A(-S) ” refers to both the HDC-8223A and the HDC-8223A-S unless
otherwise noted.
• “ HDC-8223A-S ” refers only to the HDC-8223A with the Frame Sync option enabled.
• “ OG3-FR series frame ” refers to the OG3-FR series frames and any available options
unless otherwise noted.
• “ openGear frame ” refers to the DFR-8321 series and OG3-FR series frames and any
available options unless otherwise noted.
• “ Operator ” and “ User ” refer to the person who uses HDC-8223A(-S).
• “ R2-8223A ” refers to the full rear module that provides four reclocked outputs and four
processed outputs.
• “ R2C-8223A ” refers to the full rear module that provides two reclocked outputs, two
processed outputs, and four analog outputs.
• “ SAA ” refers to Safe Action Area.
• “ STA ” refers to Safe Title Area.
• “ System ” and “ Video system ” refer to the mix of interconnected production and terminal
equipment in your environment.
Conventions
The following conventions are used:
• The “ Operating Tips ” and “ Note ” boxes are used throughout this manual to provide
additional user information.