Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 27 / 80

HDC-8223A(-S) User Manual (Iss. 03) Operation • 4–3
Using DashBoard
Before proceeding, ensure that the DashBoard Control System is installed on a PC connected to
your facility network. The DashBoard software and user manual are available from the Ross
Video website.
To launch DashBoard
1. Ensure that you are running DashBoard software version 6.2.0 or higher.
2. Launch DashBoard by double-clicking its icon on your desktop.
3. Ensure that the openGear frame with the HDC-8223A(-S) card(s) is displayed in the
Tree View located on the left-side of the DashBoard window. It may take 30 seconds or
more to update the Tree View. Consult the
MFC-8300 Series or MFC-OG3 Series User
Manual and DashBoard User Manual should the Tree View not display the card.
To access a card in DashBoard
1. From the Tree View , expand the node for the openGear frame your cards are installed in.
A list of cards installed in the frame is now displayed. In the example below, the node
for Frame 1 is expanded to show a list including an HDC-8223A.
2. Double-click the node for a card to display its menus in the Device View of DashBoard
(right-side of the DashBoard window).
Example of an HDC-8223A in DashBoard
Checking Card Information
The operating status and software version the HDC-8223A(-S) can be checked using DashBoard
or the card-edge control user interface.
Proper operating status in DashBoard is denoted by green icons for the status indicators shown
above. Yellow or red icons respectively indicate an alert or failure condition. Refer to the chapter
“
Troubleshooting ” on page 6-1 for corrective action.