Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 42 / 80

5–2 • DashBoard Menus HDC-8223A(-S) User Manual (Iss. 03)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Status tabs can vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Status Tab
Table 5.1 summarizes the read-only information displayed in the Status tab.
Table 5.1 Status Tab Items
Tab Title Item Parameters Description
Status
Input Video FF, hh:mm:ss, # Errors
Reports the status of the input where:
•
FF represents the input video format
• hh:mm:ss represents the time since the
input changed
• # Errors represents the provided CRC
error counter
Output Video # Reports the current output format
SDI Input # #
Indicates the format of the specified input
signal
Reference #
Indicates the reference signal used by the
HDC-8223A(-S)
Card Voltage ##.##V Measured input voltage
Card Power #.# W Calculated power of the HDC-8223A(-S)
Card Temp Front ##.## C
Current temperature of board
Card Temp Rear ##.## C
Card Temp FPGA ##.## C Indicates the FPGA Core temperature
Card Up Time D hh:mm:ss
Reports running time elapsed since last
card power-cycle or reboot
Preset Engaged #
Card Time hh:mm:ss mm/dd/yy
Reports the NTP time being served by the
Network Controller card in the openGear
frame. Note that this requires the Network
Controller card to be configured for NTP.